Line4 logoLine4

Search line4.ai

What is XBRL Formula?

XBRL Formula is the XBRL International standard regulators use to write validation rules inside their taxonomy. Each rule is an assertion, such as “corporate exposures equal financial plus non-financial”, that software tests against every filing. Because the rules travel with the taxonomy, the firm, its software vendor and the supervisor all run the same checks and get the same answer. Outside Europe, the US Call Report edits are XBRL Formula too: by Line4’s count, the September 2026 FFIEC 031 taxonomy holds 1,046 validity edits and 2,569 quality edits.

Run a regulator’s XBRL Formula rules on a filing, free in your browser →

EBA, EIOPA and Bank of England rules. Nothing is uploaded.

Guide · 6 min read · Updated 21 November 2026 · By Jess Luper

What an assertion is

A taxonomy says what a firm can report. XBRL Formula says what must be true of what it reports. In XBRL International’s words, Formula 1.0 “is a modular specification for the definition of XBRL rules”. Each rule is written once, as an assertion, and published inside the taxonomy so every tool that loads the taxonomy can run it.

An assertion is built from variables, which pick facts out of the report using filters (“selection criteria for facts”), an optional precondition that must hold before it runs, and a test expression.

01Value assertionsTest the numbers: a total equals the sum of its parts, a ratio equals one figure divided by another, a value is not negative. Most supervisory rules are this kind.
02Existence assertionsTest that something has been reported at all, such as the reporting level on the cover template.
03Consistency assertionsTest a value the firm reported against a value calculated from other facts in the same report, within a tolerance.
2009Formula 1.0 became an XBRL International Recommendation (22 June)XBRL International →
7,000EBA validation rules across 50 reporting modules, which become about 190,000 individual checksLine4 Check manifest, November 2026
2,955EIOPA Solvency II validation rules across 9 modules (taxonomies 2.8.2 and 2.10.0)Line4 Check manifest, November 2026

An example: one EBA rule on the leverage ratio return

EBA rule v0704_m sits in the COREP leverage ratio module. In words it says corporate exposures equal financial plus non-financial corporate exposures, on template C 43.00.

How the rule is built
Variables
Three cells on C 43.00.b: row 0230 (corporate), row 0240 (financial) and row 0250 (non-financial)
Filters
Pick each cell by its concept and dimensions, so the rule finds the fact wherever it sits in the file
Test
{r0230} = {r0240} + {r0250}
Where it runs
Once for each column it covers: exposure value (c0010) and risk-weighted exposure amounts (c0030)
What the firm should be told when it fails

Corporate exposures (row 0230) should equal financial plus non-financial (rows 0240 and 0250). Here they differ: check which row is wrong before you resubmit.

What the EBA publishesShow{C_43.00.b,r0230,c0010,} = {C_43.00.b,r0240,c0010,} + {C_43.00.b,r0250,c0010,}

Rule text from the EBA taxonomy for reporting framework 4.0, as loaded by Line4 Check.

Why 7,000 rules become 190,000 checks

One assertion often covers a whole row, column or sheet of a template. The rule above is written once but runs on two columns. Across the EBA’s 50 modules in Line4 Check, about 7,000 rules expand into roughly 190,000 individual checks. EIOPA’s 2,955 Solvency II rules expand into about 60,000.

That is why speed matters. In Line4’s November 2026 benchmark, one large FINREP filing took 4.2 hours in an open-source reference processor. A firm waiting hours for an answer will submit first and fix later.

Write the rule once, in the taxonomy, and everyone runs the same check.

How regulators publish and switch off rules

Regulators publish each rule twice: as XBRL Formula inside the taxonomy, so software can run it, and in a list of validation rules in words, so people can read it. Since reporting framework 4.0 the EBA says its rules are “embedded directly in both the taxonomy and DPM”, and it still publishes the list as a spreadsheet (latest update 12 October 2026). EIOPA publishes its Solvency II list of validations the same way (updated 10 November 2026).

Rules change between releases. The EBA updates its list every quarter, and rules that “have been deactivated due to inaccuracies or IT-related issues” stay in the taxonomy but must not be used to reject a filing: in the EBA’s words, data “should not be formally validated against deactivated rules”. EIOPA publishes deactivation files separately. In Line4 Check’s EBA manifests, 806 rule IDs are switched off in at least one release, so a validation engine has to follow the current list, not just the taxonomy file.

What it means for supervisors

If you collect XBRL, write your checks as XBRL Formula in the taxonomy rather than as code in your own platform. Firms and their vendors can then run exactly the rules you will run, before they submit, and arguments about whose check is right go away.

Write the words as carefully as the formula. A failure the firm can read, naming the template, rows and values, is fixed in minutes. A failure that only prints cell codes becomes a support ticket.

Where AI fits, and where people decide

AI is useful around the rules: explaining a failed assertion in plain words, grouping hundreds of failures that share one cause, and drafting the words for a new rule from the reporting instructions.

Whether a filing passes is still decided by the assertion itself. The same file gets the same result every time, and the result, rule by rule, is kept with the filing as evidence.

Put it to workBefore your next taxonomy release, check your rules
  1. 1Is every validation rule in the taxonomy as XBRL Formula, or do some live only in your own platform?
  2. 2Does every rule have words a firm can act on, not just cell codes?
  3. 3Is the list of deactivated rules published with the release, and does your engine follow it?
  4. 4Do you know how long your largest return takes to validate?
  5. 5Count last cycle’s resubmissions caused by one rule.

Where Line4 fits

Line4 is SupTech software for financial regulators. It collects returns in XBRL, Excel and CSV by portal, API or MCP, validates them against your taxonomies and rules at the point of submission (see XBRL software for regulators), and puts AI to work reading them, with supervisors making every decision. If you work with a standard we have not yet run in production, we will say so plainly and show you how we would approach it.

Questions

What is XBRL Formula?

XBRL Formula is the XBRL International specification for writing validation rules, called assertions, that test relationships between reported values, for example that a total equals the sum of its parts. Regulators publish their rules as XBRL Formula inside their taxonomies.

What are value, existence and consistency assertions?

A value assertion tests a condition on reported values, such as a total equalling the sum of its parts. An existence assertion tests that facts have been reported. A consistency assertion compares a reported value with one calculated from other facts, within a tolerance.

How many validation rules does the EBA have?

About 7,000 rule IDs across the 50 EBA reporting modules Line4 Check covers, which expand into about 190,000 individual checks because one rule often covers several rows or columns. The EBA updates the list every quarter and deactivates rules found to be wrong, which must not then be used to reject a filing.

What is the difference between XBRL Formula and filing rules?

XBRL Formula rules check the reported numbers, such as totals adding up. Filing rules check how the report is put together: identifier, period, filing indicators, units and precision. A filing has to pass both.

What is the difference between XBRL Formula and XBRL calculations?

Calculation linkbases can only say that a total is the sum of weighted parts. XBRL Formula can express almost any test: ratios, comparisons across templates, conditions, existence and tolerances. Supervisors write most of their rules in Formula.

Do EIOPA and the Bank of England use XBRL Formula?

Yes. EIOPA’s Solvency II taxonomy carries its validation rules as XBRL Formula (2,955 rules across 9 modules in Line4 Check), and the Bank of England’s Solvency UK taxonomy carries 2,288 across 5 return types.

Can Line4 Check run XBRL Formula rules?

Yes. Line4 Check runs the EBA, EIOPA and Bank of England validation rules in your browser, without uploading the file, and shows each failure in words with the values found. In a November 2026 benchmark it agreed with an open-source reference processor on 99.95% of 417,531 formula assertions.

Do regulators outside Europe write their rules in XBRL Formula?

Some do. The US Call Report edits are XBRL Formula: by Line4’s count, the September 2026 FFIEC 031 taxonomy holds 1,046 validity edits and 2,569 quality edits as formula resources, and 870 of the quality edits compare a value with earlier quarters. Each edit carries two messages in its own label file. Australia’s APRA does not: APRA Connect states each rule as an expression in its own syntax on an Excel rules worksheet, such as the 39 rules for the Financial Claims Scheme return. Line4 runs both kinds of rule, and its free Call Report check runs the FFIEC edits in the browser.

Share this guideShare on LinkedIn
Was this useful?

For supervisors

New guides and Insights, by email

One short email when we publish something worth your time, from Jess Luper. No spam, unsubscribe any time.