1 min readWarningEBA reporting framework 4.2Updated 10 November 2026

TSLRR: to be made up of CET1 capital cannot be more than total SREP leverage ratio requirement (TSLRR) (EBA rule v10645_m)

A warning in the leverage ratio return (COREP LR), on template C 47.00, leverage ratio calculation.

The rule in plain words

TSLRR: to be made up of CET1 capital cannot be more than total SREP leverage ratio requirement (TSLRR).

All the values are in the amount / ratio column (0010) of C 47.00.

How the Line4 Check report words itShow

Word for word as the report shows it when the rule fails.

TSLRR: to be made up of CET1 capital <= Total SREP leverage ratio requirement (TSLRR)

What to do if your filing fails it

  1. 01Open the template below and find the cells the rule reads.
  2. 02Compare the values in your file. If the first is bigger than it may be, one of them is wrong: check both before you change either.
  3. 03EBA allows a small rounding difference, worked out from the decimals each value is reported with.
  4. 04It runs only when your filing indicators mark C 47.00 as reported.
  5. 05This is a warning. It does not stop the filing on its own, but your authority may ask you to explain it.

The cells it reads

Leverage ratio calculation (C 47.00)

Rows

  • 0420Total SREP leverage ratio requirement (TSLRR)
  • 0430TSLRR: to be made up of CET1 capital

Column

  • 0010Amount / Ratio

A worked example

The first of its checks, with simple numbers.

Illustrative values
TSLRR: to be made up of CET1 capital1,200
What the rule then expects

Total SREP leverage ratio requirement (TSLRR) must then be at least 1,200.

1,200Passes
1,100Fails

A file that reports 1,200 passes. One that reports 1,100 fails, by 100.

The numbers are illustrative, reported to the unit, so the rounding tolerance does not change the result.

Show the rule as writtenShow

EBA's formula. Cells are written as {template, row, column, sheet}.

{C_47.00,r0430,c0010,} <= {C_47.00,r0420,c0010,}

Every COREP LR rule, by template

Checks like this one, run at the point of submission, are the first step to real-time supervision.